BMJBC - 81-30 LINE, LATEX SATIN ENAMEL
- MSDS: BMJBC
- Manufacturer: MAUTZ PAINT CO
- Product Name: 81-30 LINE, LATEX SATIN ENAMEL
- National Stock Number: 8010-00F020225
Product Identification
Product ID:81-30 LINE, LATEX SATIN ENAMEL
MSDS Date:01/01/1987
FSC:8010
NIIN:00F020225
MSDS Number: BMJBC
Responsible Party
MADISON, WI 53703
Emergency Phone: (608) 262-3702 OR (608) 255-1661
Info Phone: (608) 262-3702 OR (608) 255-1661
Cage: 0DHF1
Contractor
Telephone: (608) 262-3702 OR (608) 255-16
Cage: 0DHF1
Ingredients
ETHYLENE GLYCOL, GLYCOL
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 6.9%/W
ACGIH TLV: C 127 MG/CUM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITAATION. INHALATION:
RESPIRATORY TRACT IRRITATION & ABDOMINAL PAIN.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN: IRRITATION. INHALATION: RESPIRATORY
TRACT IRRITATION & ABDOMINAL PAIN.
First Aid
First Aid:EYES: FLUSH W/WATER. SKIN: WASH W/SOAP & WATER. INHALATION:
REMOVE TO FRESH AIR. GIVE CPR OR OXYGEN IF NEEDED. OBTAIN MEDICAL
ATTENTION IN ALL CASES.
Accidental Release
Spill Release Procedures:VENTILATE AREA. SOAK UP SPILL W/ABSORBENT
MATERIAL SUCH AS SAWDUST. SMALLER SPILLS MAY BE FLUSHED W/WATER &
DRAINED.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING. PRODUCT CONTAINS
ENCAPSULATED CRYSTALLINE SILICA.
Exposure Controls
Respiratory Protection:USE NIOSH APPROVED CHEMICAL RESPIRATOR TO REMOVE
SOLID AIRBORNE PARTICLES.
Ventilation:LOCAL EXHAUST
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE BATH/SAFETY SHOWER
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:68.2%
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.